Can I Use an Extension Cord With My ReGen8 Sauna?Updated 3 hours ago

Yes, an extension cord can be used with a ReGen8 sauna if the existing power cord cannot reach the wall outlet. However, we recommend connecting the sauna directly to a wall power point wherever possible.

For safe operation:

Use a standard Australian power outlet with the correct voltage and electrical capacity required for the sauna.
Do not connect the sauna to a shared power board with other appliances or equipment.
If an extension cord is required, use a suitable heavy-duty cord with the correct cable size for your sauna model.
We recommend using appropriate surge protection.
Keep the extension cord as short as practical and ensure it is fully extended/uncoiled during use.
For outdoor saunas, the plug, socket connection and extension cord must be protected from rain, water and moisture at all times.

Extension Cord Specifications

Use a 3 × 2.5 mm² extension cord for the following models:

ReGen8 Quadro Indoor - 4 Person Infrared Sauna
ReGen8 Quadro Outdoor - 4 Person Infrared Sauna
ReGen8 Quadro Corner - 4 Person Infrared Sauna
ReGen8 Trio Outdoor - 3 Person Infrared Sauna

This requirement applies to White, Natural and Thermowood finishes, where available.

All Other ReGen8 Sauna Models
For all other ReGen8 sauna models, a 3 × 1.5 mm² extension cord is suitable, including the ReGen8 Solo V2 and Duo Outdoor.

Important: Always ensure the extension cord and outlet are appropriately rated for the sauna's electrical requirements. Never use a damaged extension cord, and keep all outdoor electrical connections completely protected from rain and moisture.

Was this article helpful?

Yes